The Reconstruction of the Object Surface using Confocal Microscope with Hyperchromatic Lens
Abstract
The usage of a tandem-scanning reflected-light microscope is not common but this technology offers the wide possibilities in the area of the surface reconstruction. This article presents a method that can reconstruct the 3D relief from a single image with a known calibrated set of images. The method uses the property that the points in the same height are visualized in the same color and we propose the nonlinear optimization to find this dependence. Subsequently, the low brightness parts are added by circular partial convolution.
References
Lange,D.A., Jennings,H.M., Shah,S.P.: Analysis of surface-roughness using confocal microscopy. J. Mater. Sci. 28(14), pp. 3879–3884 (1993). DOI 10.1007/BF00353195
Lange,D.A., Jennings,H.M., Shah,S.P.: Relationship between fracture surface roughness and fracture behavior of cement paste and mortar. J. Am. Ceram. Soc. 76(3), pp. 589-597 (1993).
Zampini,D., Jennings,H.M., Shah, S.P.: Characterization of the paste-aggregate interfacial transition zone surface-roughness and its relationship to the fracture-toughness of concrete. J. Mater. Sci. 30(12), pp. 31493154 (1995).
Lange, D.A., Quyang,C., Shah, S.P.: Behavior of cement-based matrices reinforced by randomly dispersed microfibers. Adv. Cem. Based Mater. 3(1), 20-30 (1996).
Mouralova, K., Kovar, J., Klakurkova, L., Bednar, J., Zahradnicek, R.: Analysis of the surface morphology and topolography of pure aluminium machined using WEDM. Measurement 114, pp. 169-176 (2018) DOI 10.1016/j.measurement.2017.09.040
Mouralova, K., Matousek, R., Kovar, J., Mach, J., Klakurova, L., Bednar, J.: Analyzing the surface layer after WEDM depending on the parameters of a machine for the 16MnCr5 steel Measurement 94, pp. 771-779, (2016) DOI 10.1016/j.measurement.2016.09.028
Petran, M., Hadravsky, M., Egger, M.D., Galambos, R.: Tandem-Scanning Reflected-Light Microscope. Journal of the Optical Sociaty of America 58(5), pp. 661–664 (1968) DOI 10.1364/JOSA.58.000661
Claudette M. St. Croix, C.M., Shand,S.H., Watkins, S.C.:Confocal microscopy: comparisons, applications, and problems. BioTechniques 39(S2–S5), pp. (2005) DOI 10.2144/000112089
Nussbaumer, H.J.: Fast Fourier Transform and Convolution Algorithm, vol. 2, second edn. Spriger-Verlag, Berlin Heidelberg (1982)
MENDEL open access articles are normally published under a Creative Commons Attribution-NonCommercial-ShareAlike (CC BY-NC-SA 4.0) https://creativecommons.org/licenses/by-nc-sa/4.0/ . Under the CC BY-NC-SA 4.0 license permitted 3rd party reuse is only applicable for non-commercial purposes. Articles posted under the CC BY-NC-SA 4.0 license allow users to share, copy, and redistribute the material in any medium of format, and adapt, remix, transform, and build upon the material for any purpose. Reusing under the CC BY-NC-SA 4.0 license requires that appropriate attribution to the source of the material must be included along with a link to the license, with any changes made to the original material indicated.
